Description

Manufacturer: Envirolyte Industries International Ltd. in Estonia
Model: Ela-24000
Line consists of: Electrical department, hydraulic department, two chambers (anode chamber and cathode chamber).
 
Technical data:
Voltage: 400V
Circuit breaker: 1 x C80A
Overall dimensions of the case: 1650 x 1860 x 800 mm with all fittings and cable connectors
Automatically adjustable pH control
Salt container size:
100 L: diameter 1.0 m, height: 1.3 m
250 L: diameter 1.5 m, height: 1.4 m
500 L: diameter 2.0 m, height: 1.6 m
 
Some key data according to the manufacturer:
- The Envirolyte unit ela-24000 is designed for the production of electrolyzed (EW) water analyte for a variety of applications where disinfection, sterilization and water treatment are required
- The device uses an electrolyzer (cell) to electrically activate a solution of common salt (NaCl).
- There are two chambers (anode chamber and cathode chamber), which are separated by a membrane, each with a positive and a negative electrode
- A direct current flows through the solution and produces anolytes from the positive chamber after the brine volume in the negative chamber has been treated
- The strength of the solution varies depending on the current flowing between the electrodes and gives different values for ORP (redox potential), pH and C.ac (active chlorine).
- The general setting for these units is to produce 100% neutral anolyte with ~500 ppm FAC

Condition: Ready for use
 
Reference number: PRO3810