Arburg 520 C 2000-675 2x injection molding machines

Baden-Württemberg, Bühl - Germany

10.000 €

Arburg 520 C 2000-675 2x injection molding machines


10.000 €


Igor Kulinski

Baden-Württemberg, Bühl - Germany


Whatsapp Send a message




520 C 2000-675

Sub Category:

Glass, plastic and chemistry



Working hours:

Not specified

Manufacturer: Arburg GmbH + Co KG in Germany
Model: 520C 2000-675
Year of construction: 2000
Number of operating hours: 65837 pump/52246 automatic operation
Line consists of: 2x injection molding machines
Technical data of the 1st injection molding machine:
Current type: 3 ̃
Voltage: 400V/230V/24V
Frequency: 50Hz
Motor head rated current: 78.0/22.3A
Total rated current: 100.00 A
Total connected load: 58.0 kW
Machine was serviced by “Arburg”.
The original spare parts from “Arburg” were installed in each case
Plasticizing cylinder in highly wear-resistant design and fifty screw
Nozzle tip with the flat nozzle 0 degrees and the nozzle hole 4 mm
The injection molding machine has a slewing crane with a maximum boom of 650 kg. If desired, the crane lifting unit (crane test certificate available until August 2023) can be included
Technical data of the 2nd injection molding machine:
The machine is identical in construction only with an extended locking program
Condition: Working
Available immediately. The injection molding machines can be inspected on site at any time during ongoing operation.
Reference number: PRO4028

* Since this ad is translated automatically, some translation errors may have occurred.

Share :
Expertise Report

Shop with confidence by seeing all the details of the machine you will buy thanks to the expertise report!

Buy Machine

If you want production to continue without stopping and gain speed and efficiency at the same time, you are at the right place.

Sell Machine

Find out the estimated value of the machine by our expert expert team and sell your machine at its worth.

Same ads