Description

Schrack III, RY carrier Year 2000 Punching and bending machine

DESCRIPTION
 

Punching and forming center
Flexible manufacturing system for the production of relays

Power supply

Mains connection 3 x 380 V
Frequency 50 Hz
Control voltage 24 V
Auxiliary voltage 24 V = 220 V 50Hz
Compressed air min max 4 / 6 bar

Dimensions
Material inlet height approx. 1340 mm
Reels 800 x 800 x 1300 mm
Weight Total system (without cleaning system) Approx. 14,000 kg

Main drive
type Hytrokmotor with brake
type BBC. T5 F4 E4 + TB 24

Transfer bending unit
drive via toothed belt, one full change plate each at the front and rear,
central lubrication

connection Number of connection options 12 each transfer units at the front and
rear or 6 each center stamp consoles at the front and rear

Transfer unit stroke Deformation force forced cam controlled, max. 22 mm max.
7.5 KN

transfer unit Stroke Deforming force Eccentric drive, max. 8 mm, max. 15 KN
Center ram Stroke Drive by direct gear, forced cam controlled, max. 22
mm, max. 7.5 KN

Lubrication via central lubrication system

Reel
Number 3
Type Reversible reel, vertical, with two reel crosses
Attachment 1 each with swiveling Paper reel
drive Disc rotor 0.1 kW
Speed ​​control infinitely variable up to max. 60 min-1
Direction of rotation Clockwise and anti-clockwise
rotation Control type Loop control with contact fork and timer relay
Coil/coil weight max. 200kg
Coil dimensions inside 250-500 mm outside max. 900 mm

Central lubrication system
design Single-line system
Lubrication carrier Fluid grease
Container contents 3L
flow rate 3mm³/pulse
switch-off pressure 28 bar
ambient temperature max 80 degrees